Arris OEM Ecofriendly HS-2030 Water Screen Spray Machine for Spraying Metal Plastic Acrylic PVC Glasses

• Customization: Available
• After-sales Service: 24/7
• Warranty: 24/7
• Model NO.: HS-2030
• Power: 2.2 Kw
• Wind: 8000m3
• Booth Length: 3000mm
• Noise: Low
• Transport Package: Frame
• Specification: 2500mm x 1200mm
• Trademark: Arris
• Origin: Jiaxing
• HS Code: 8477409000
• Production Capacity: 1000/Year
• Package Size: 250.00cm * 300.00cm * 150.00cm
• Package Gross Weight: 500.000kg
• Lead Time: 60 days (1 - 10 Pieces) ; To be negotiated ( > 10 Pieces)

Product Description

 

Product Description

HS-2030Water Screen Spray Machine
Technical parameters:
1.Clear the paint with torrent of water, which filters away the oil or dust particles in the
air, reaching the goal of cleaning the environment and ensuring workers' health.
2.The large water curtain is made of stainless steel sheet, with excellent rust
resistance and corrosion resistance.
3.Water cycling system, centrifugal water pump is adopted, with filtering protection
available.
4.Automatic water entry device is available, ensuring the filtering of oil from the water.
5.Centrifugal low noise fan is adopted.
6.It can either be manually operated or form a systematic production streamline after equipped with conveying belts, applied to the coating in industries such as metal.plastic, toys, glasses and alloys, etc.
 

power	2.2Kw	booth length	3000mm
wind of fan	8000m3	noise	low

 

HS-2030Water Screen Spray Machine

Water Screen Spray Booth could be used in the operation of spray-painting in most industries, it lakes advantage of viscosity of water this makes paint separate from air and mix with water, as we adopt t secondary spray system.the waste paint removing rate reaches more than 999, especially suitable for the plastic and rubber spraying.
 

 

1.Main Usage And Applicable Scope
Water Screen Spray Booth could be used in the operation of spray-painting in most industries, it takes advantage of membrana dermalis and viscosity of water, this makes paint separate from air and mix with water, as we adopt t secondary spray system, the waste paint removing rate reaches more than 99%, especially suitable for the plastic and rubber spraying.

2.Technical parameters:
Power:There phase four wire 380V 50HZ
Motor: 2.2KW,1400r/min
Air volume: 8000m³/h
The size of fan: φ600mm
The power of water suction pump:1.5Kw
3. The summary of structure
1.Clear the paint with torrent of water, which filters away the oil or dust particles in the air, reaching the goal of cleaning the environment and ensuring workers' health.
2.The large water curtain is made of  stainless steel sheet, with excellent rust resistance and corrosion resistance.
3.Water cycling system, centrifugal water pump is adopted, with filtering protection available.
4.Automatic water entry device is available, ensuring the filtering of oil from the water.
5.Centrifugal low noise fan is adopted.
6.It can either be manually operated or form a systematic production streamline after equipped with conveying belts, applied to the  coating in industries such as metal, plastic, toys, glasses and alloys, etc.

4.Transport
Please prevent the machine from bumping,slipping and falling.
5. Installation and debugging 
1.It should be placed on the hard and flat reinforced-concrete ground.
2.Conncet to the electricity
There phase four wire,380V 50HZ,alternating current
3.Grounding
The machine must be grounded,you should use the yellow and green grounded wire,and the cross-sectional area is not less than 2.5mm.The resistance between the machine and the connected part should be less than0.1Ω.
6.Maintainance
Please keep the machine clean,and change the water regularly,in case of shortening the life of water pump.

 

Certifications

 

Communication in exhibition

 

Other production

 

 

Processes for making a bathtub

 

The bathtub making line includes these equipments as follows,

1. Bathtub vacuum forming machine

2. Bathtub trimming(edge cutting) machine

3. Resin spray gun with chopper(also can be sprayed manually)

4. Resin mixer(thermostatic resin mixer or simple mixer)

5. Vacuum station(vacuum pump and vacuum tank)

6.Air compressor system(air compressor and air pressure tank)

7.Bathtub mould


Bathtub making materials are as follows,

1. Acrylic sheets(you also can choose acrylic, ABS composite sheets)

The thickness: 2.3mm, 2.5mm, 3mm, 3.2mm3.5mm, 4mm, 4.5mm

Can be with colors

Acrylic sheets looks more bright

2. Acrylic, ABS composite sheets

With lower prices than the pure acrylic sheets

Composite sheets are more strong

Can be with colors

3. Resin

DC191, to make the reinforcement together with the fiber glass

4. Fiber glass

To make the reinforcement together with the resin

Specifications: 300G/M2, 250G/M2, or 400G/M2

5. Stone powder(calcium carbonate powder, CaCO3 powder)

Mixed with resin, as the filling materials for the mixture of the resin and fiber glass reinforcement with very cheap price, you can buy it in your own country

6. Catylist for the resin chemical action

The blue chemical(mixed with resin and stone powder) and the white chemical(add the white chemical when you want to spray the materials)